What is a double tapped breaker?

Two wires under one breaker terminal that is made for one. It is a common item on inspection reports, because the second wire may not stay tight. The fix is to give each wire its own breaker or join them properly to a single wire.

Can a panel be repaired, or does it need replacing?

Many problems are repairs: a loose lug, a failed breaker, a damaged cover. A panel with burned bus bars, no room for needed breakers, or a make with known problems is usually better replaced. We tell you which, with a price for each.

Why does a breaker trip and not reset?

Either something on the circuit is still drawing too much or shorting, or the breaker has failed. We test the circuit with the breaker off to tell the two apart before deciding what to replace.

Electrical Panel Repair San Antonio

A panel should be quiet and cool to the touch. Buzzing, warmth, a burning smell or breakers that trip and will not reset are signs that a connection inside is loose, a breaker is failing, or a part of the panel has been overheating. Those are the problems that grow if they are left alone.

We open the panel, find the cause, and repair what can be repaired: tightening and replacing connections, replacing damaged breakers, and correcting double tapped breakers that put two wires where the breaker is made for one. When the panel itself is past repair, we tell you and price the replacement separately.

What electrical panel repair covers

Breakers that trip or will not reset
Buzzing, crackling or warm panels
Loose lugs and connections
Scorched or damaged bus bars
Double tapped breakers
Damaged or missing panel covers and labels

How electrical panel repair goes

1.You tell us what the panel is doing: the noise, the heat, the breaker that will not stay on.
2.The electrician opens the panel and finds what is causing it before anything is replaced.
3.You get one flat price for the panel repair and approve it before work starts.
4.The repair is made, every connection is checked and tightened, and the circuits are tested before the cover goes back on.

A veteran-owned electrician serving San Antonio, including Alamo Heights, Stone Oak and Helotes.

See us on Google Review us on Google

Tell us what is going on

Tap what you need, tell us when, and a real electrician calls you back.

Step 1 of 2

What do you need?

When works for you?

Today if you canThis weekI am flexible

Sparks, burning smell, or a dead panel? Call (210) 446-5446 now instead of waiting on a callback.

Who are we calling?

Best number to reach you

We only use your number to call you back about this job.

By continuing, you agree that Wattsmith may call or text you back about your request.

You approve one flat price before any work starts. No hourly meter, no surprise invoice.

We hit your window. Miss it with no heads-up, and that is $149 off. The fine print

A Wattsmith electrician calls you back within 15 minutes during business hours.

FAQ

Common questions

Straight answers. If you do not see yours, call us and ask.

It should be looked at soon. A buzz usually means current is crossing a loose or poor connection, which makes heat. Heat at a connection is how panel damage starts, so the sooner it is found the smaller the repair.

Ready for an electrician who does it right?

Flat-rate pricing quoted up front. Licensed and insured. A Wattsmith electrician calls you back within 15 minutes during business hours.

(210) 446-5446 Get Your Flat-Rate Quote

Licensed and Insured
BBB Accredited
Flat-Rate Pricing
Background-Checked

Electrical panel repair in San Antonio